





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Hikvision
3000 Mbps dual-band Wi-Fi 6 ceiling AP, 2×2 MIMO
1x 2.5G Multi-Gig PoE-in port, up to 256 users (100 recommended)
The Hikvision DS-3WAP622E-SI is an indoor wireless access point that brings Wi-Fi 6 coverage to offices, schools, clinics, hotels and other buildings where many people need a stable connection. Designed for ceiling mounting, it sits discreetly in the room while delivering dual-band wireless with a combined rate of up to 3000 Mbps.
Wi-Fi 6 is the current generation of wireless networking. It is designed to handle more devices in the same space than older standards, which matters in places with laptops, tablets, phones, and smart displays all connected at once. The 2×2 MIMO design uses two transmit and two receive streams, helping the access point send and receive several data streams together.
The access point’s 2.5G port is the main connection to your network. Because it accepts PoE, a compatible PoE switch or injector can supply power through the same cable that carries data. The supplier specifically recommends PoE and notes that no separate DC 12V adapter is needed when PoE is used. If you plan to power the unit with an adapter instead, you will need to source one separately.
Choosing a PoE source with enough power budget for the access point is important. Check the port speed and power capacity of your switch before installation, particularly when several access points share the same switch.
The DS-3WAP622E-SI supports two main ways of working. In a larger site, several units can be managed in batches through an AC router, which simplifies configuration and monitoring across the network. For a single unit or a small site, standalone configuration through the access point’s own web page is available, so the device can be set up without a central controller.
Hikvision’s HPP/HC unified cloud app adds remote management. This allows the installer or site administrator to check on the device and make changes without being physically present, which is useful for multi-site businesses and for installers who support customers remotely.
The access point supports up to 256 user connections, with 100 recommended for typical operation. Staying within the recommended number helps keep performance steady for everyone on the network. For larger rooms or high-density areas, plan for more than one access point and place them so that coverage overlaps slightly, which helps devices roam smoothly.
Mount the unit on a ceiling in a central position within the area it needs to cover. Keep it away from large metal objects that may block the signal, and run the network cable to a switch or injector that supports PoE on the 2.5G port. Before installing, confirm the number of users expected in the area and plan the number of access points accordingly. Once mounted, configure the device using either the batch management option through your AC router, the web interface, or the cloud app, depending on how your network is set up.
The Hikvision DS-3WAP622E-SI is a practical option for indoor sites that need dependable Wi-Fi 6 coverage with flexible management and PoE-based installation.
Hikvision
3000 Mbps dual-band Wi-Fi 6 ceiling AP, 2×2 MIMO
1x 2.5G Multi-Gig PoE-in port, up to 256 users (100 recommended)
Share this on your favourite channel: