





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Hikvision
RG59 coaxial cable with power, black, 100m roll
For analogue (TVI) CCTV cameras and DVRs

The Hikvision RG59-100M is a 100-metre roll of black RG59 coaxial cable with power conductors built into the same jacket. It is designed for analogue CCTV systems, where one cable carries the live video picture from the camera to the recorder and also delivers the power the camera needs to operate. It is part of the Hikvision analogue (TVI) accessories range, alongside the DVRs and cameras it is intended to connect.
Using a combined video and power cable simplifies cabling for security installers. Instead of running separate coax and power lines to each camera, the installer runs one cable and terminates it at both ends. This reduces the number of holes drilled through walls, the amount of conduit or trunking needed, and the time spent on each camera point.
RG59 is a widely used coaxial cable standard for video transmission. A coaxial cable has a central conductor surrounded by insulation, a shield and an outer jacket. In this product the coax core carries the video signal, and the extra power conductors are included in the same sheath to feed the camera. The black outer jacket is suited to typical indoor and outdoor CCTV runs and gives the cable a neat finish on visible routes.
Specific conductor gauges, impedance values and power ratings are not listed in the product description, so check the manufacturer documentation for these before a long or heavy-load run.
The RG59-100M suits a range of analogue CCTV projects. Common applications include:
Good installation practice makes a large difference to picture quality and reliability. Plan the route before pulling cable, keep the run as short as practical, and avoid laying the coax tightly alongside high-voltage mains cables, which can introduce interference. Bends should be gentle, and the cable should not be crushed when fixed with cable ties or clips.
Terminate the ends with connectors that suit the cable and the camera and DVR inputs. Keep the video and power connections clean and dry, and use suitable weatherproof sleeves or boots at outdoor joints. Test each camera after installation, checking the picture, the power supply to the camera and the recording quality on the DVR.
Measure the distance from each camera position to the recorder, then add an allowance for routing, drops and the service loop at each end. Because the cable comes in a 100-metre roll, plan cuts to minimise waste when several cameras are fed from the same spool. For longer runs, consider the voltage drop along the power conductors and choose a camera power supply and cable routing that keep the camera within its specified voltage range.
This product is aimed at security installers, electrical contractors and technically minded homeowners who are building or extending an analogue CCTV system. Anyone working with mains wiring, or unsure about power requirements for a particular camera, should seek advice from a qualified installer before starting work.
Hikvision
RG59 coaxial cable with power, black, 100m roll
For analogue (TVI) CCTV cameras and DVRs
Share this on your favourite channel: