





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Molex
12 fiber singlemode G.657A2, duplex SC APC connectors
Green, low loss
The Molex 12 fiber singlemode G.657A2 duplex SC APC green low loss assembly is a fibre cabling component for structured networks that need dependable singlemode links over longer distances. It combines twelve singlemode fibres with duplex SC APC connectors, a bend-insensitive G.657.A2 fibre type and a green connector finish, all from the Molex range of copper and fibre connectivity products.
Singlemode fibre carries light along a very narrow core, which allows signals to travel much further than multimode fibre. The G.657.A2 classification describes a bend-insensitive version of singlemode fibre. It is designed to keep signal loss low when the cable is bent more tightly than standard singlemode fibre allows, which is common inside cabinets, cable trays and wall boxes where space is limited.
The twelve fibres give the assembly a high fibre count in a single run. Each fibre is terminated for duplex connection, so one pair handles transmit and receive. The SC connector is a push-pull connector with a latching action, widely used in telecommunications and enterprise backbones.
APC stands for angled physical contact. The end face of the ferrule is polished at an angle, which reduces back reflection where light reflects toward the source. This matters on singlemode systems and on links that are sensitive to reflected light. APC connectors must only be mated with other APC connectors, so check the connector type on both sides of a link before connecting.
The green colour of the connector housing is the common identifier for APC polish. It helps installers tell APC and UPC connectors apart at a glance, which reduces the risk of mismatched connections during installation and maintenance.
This assembly suits fibre backbones between communications rooms, building risers and campus links, where singlemode performance over longer distances is required. It can be used to connect into fibre distribution panels and patch fields, linking the main cable plant to active equipment. Data centre interconnects and enterprise core networks are other common applications, particularly where high bandwidth and low loss are priorities.
Because the fibres are bend-insensitive, the assembly is well suited to tight routing paths, such as cabinet corners and cable management arms. Installers can route the cable with less risk of signal degradation than with standard singlemode fibre.
Fibre connectors are precision parts and need careful handling. Keep dust caps on connectors until they are mated, and avoid touching the polished end faces. Inspect connectors with a fibre microscope before connecting, and clean them with an approved fibre cleaning method if needed. Avoid tight bends beyond the cable minimum bend radius, and secure the cable so it is not pulled or crushed during installation.
Before ordering or installing, confirm the required fibre count, connector type and polish with the existing network design. Matching these details to the patch panels and equipment on each end of the link helps avoid delays and rework.
For a planned singlemode backbone or riser run, this Molex assembly offers a clear combination of fibre count, bend tolerance, APC connector polish and a low loss design. It fits well into structured cabling projects that already use Molex fibre components and that need a consistent, well-specified link between cabinets, rooms and buildings.
Molex
12 fiber singlemode G.657A2, duplex SC APC connectors
Green, low loss
Share this on your favourite channel: