





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
MOLEX
4 Core Multimode OM3 Fibre, Loose Tube, PE Insulated, Black
Suitable for interior and exterior (Int/Ext) installation
The Molex CFR-00793 is a 4 core multimode fibre optic cable designed for structured cabling networks. It combines the OM3 multimode fibre grade with a loose tube construction and a black PE insulated jacket, and it is rated for both interior and exterior (Int/Ext) installation. This makes it a practical choice for backbone and building-to-building links where one cable type needs to cover more than one environment.
A loose tube cable holds its fibres inside a tube that is larger than the fibres themselves. This allows the fibres to move slightly without stress when the cable is bent, pulled or exposed to temperature changes. For this reason loose tube designs are often chosen for outdoor and mixed-environment runs.
The PE jacket is a tough, weather-resistant polymer commonly used for fibre and copper cable sheathing. Its black colour is typical for outdoor and underground grade cable, and it helps protect the inner fibres from moisture and handling damage.
OM3 is one of the multimode fibre grades used in building and campus networks. Multimode fibre allows light to travel through a relatively wide core, which makes equipment simpler and more affordable than singlemode systems over short and moderate distances. OM3 has been a common choice for backbone links in offices, schools, hospitals, industrial sites and data rooms.
Fibre cable should be handled within the bend radius specified by the manufacturer, and care must be taken during pulling so that the tensile load limit is not exceeded. Terminations should be made with suitable fibre connectors, splice trays or panels from the same product family, and the work should be tested before the cable is put into service.
Because the cable is rated for both interior and exterior use, it is important to confirm that the chosen installation route, entry points and jacket rating match the site conditions. Local electrical and cabling regulations should also be followed.
The Molex CFR-00793 suits installers who need a multimode OM3 backbone cable with a loose tube design and a durable PE jacket. It is a good match for projects where the same cable type must serve both inside and outside the building. Compare the fibre count, jacket and environmental rating with your project specification, and check the Molex datasheet for full technical details before ordering.
MOLEX
4 Core Multimode OM3 Fibre, Loose Tube, PE Insulated, Black
Suitable for interior and exterior (Int/Ext) installation
Share this on your favourite channel:



