





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Molex
144-fibre singlemode outside plant cable, PE single jacket, armoured, gel-filled
Article CFR-00901
The Molex CFR-00901 is a 144-fibre singlemode fibre optic cable for outside plant (OSP) use. Outside plant means cable that is installed outdoors, in ducts, on aerial routes or underground, rather than inside a building. This cable is designed for the demanding backbone links that carry large volumes of data between buildings, sites and network nodes. It forms part of the Molex single sheath offering for singlemode fibre, which is aimed at long-distance and high-capacity routes.
Fibre optic cable has become the preferred medium for backbone networks because it carries signals over long distances with low loss and high bandwidth. A singlemode cable, such as this one, uses a very small core that allows a single light path, which is why it is suited to longer runs than multimode cable. A 144-fibre count means one cable can carry a large number of separate links, so fewer cable runs are needed for future expansion.
The cable has a polyethylene (PE) single jacket. Polyethylene is a tough, weather-resistant sheathing material that protects the fibres from moisture and the general wear of external installation. The cable is armoured, which adds a protective layer against crushing, rough handling and rodent damage. It is also gel-filled, meaning the space around the fibres is filled with a gel that helps keep water out and reduces movement of the fibres inside the sheath.
Outside plant cable needs careful planning before it is laid. Confirm the route, check that ducts or trenches have enough space, and allow for the minimum bend radius given in the datasheet. Pulling tension limits should be respected during installation, as excessive force can damage fibres. Once the cable reaches its termination point, splicing and termination should be carried out by trained installers using suitable splice trays, enclosures and connectors. Seal all entry points to keep moisture out of the cable and the enclosures.
This cable suits a range of network projects where high fibre capacity and external durability are required:
The Molex CFR-00901 is intended for installers, network designers and system integrators who are building or extending external fibre infrastructure. Service providers and large enterprises that need a high-count trunk for future growth will also find it useful. For indoor patch connections or short runs inside a building, a different cable type is usually more suitable.
Before ordering, review the full datasheet for the complete specifications, including attenuation, bend radius, tensile rating and temperature range, and confirm that the cable matches your project requirements.
Molex
144-fibre singlemode outside plant cable, PE single jacket, armoured, gel-filled
Article CFR-00901
Share this on your favourite channel: