





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Molex
Cat6A shielded patch cord, LSZH sheath, 568A/B wiring, 2 m
Colour variants: suffix -0* in article number

The Molex PCD-07001-0* is a 2 metre Category 6A patch cord designed for structured copper cabling. It combines a shielded construction with a low smoke zero halogen sheath, and it is wired to the 568A/B standard. It is intended for the short connections that make up the active part of a network, linking switches, routers, servers and workstations to the fixed cabling in a building.
Patch cords are the parts of a network that get handled most often. They are plugged and unplugged when equipment is moved or changed, so they need reliable connectors and a jacket that can take regular handling. This Molex cord is supplied as a complete, factory-made lead, so the installer does not need to terminate the ends on site.
LSZH is a jacket material chosen for indoor installations where fire safety and occupant safety are a concern. When a cable jacket burns, a standard PVC sheath releases dense smoke and corrosive halogen gases. LSZH materials produce much less smoke and do not release halogen gas. This is why LSZH cabling is often specified for offices, schools, hospitals, data centres and other buildings with many people or sensitive equipment.
Shielding helps protect the twisted pairs inside the cord from electrical noise in the surrounding environment. In a busy comms room, with power cables, lighting and other equipment nearby, a shielded lead is a sensible choice where the cable runs close to sources of interference. Shielded leads must be used with a correctly bonded and earthed shielded system, so the installer should follow the manufacturer guidance for the rest of the link.
568A/B is the common wiring scheme for RJ45 connectors. The two schemes differ only in the order of two pairs. Using the same scheme at both ends of a straight-through lead gives a correct connection, and the scheme should match the rest of the installation.
A 2 metre lead is suited to short runs within a rack or between a nearby outlet and a device. Choose a colour that helps you identify the purpose of each lead, for example one colour for data and another for voice, or a different colour for each switch. The -0* suffix in the article number shows that colour variants exist, so confirm the exact colour code with your supplier before ordering.
Keep spare patch leads of the same type on hand, and label both ends of each lead when it is installed. Clear labelling makes fault finding faster and reduces the risk of disturbing live links during maintenance.
Molex
Cat6A shielded patch cord, LSZH sheath, 568A/B wiring, 2 m
Colour variants: suffix -0* in article number
Share this on your favourite channel: