





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
The Molex SC/SC DPX OM4 is a ready-made fibre patch lead for connecting active equipment and passive patch panels in a structured cabling network. It is a 2 metre duplex multimode lead, terminated with SC connectors at both ends, and it is designed for short connections where a neat, pre-made cable is needed.
In a typical network rack, fibre patch leads carry the traffic between switches, servers, storage and distribution panels. A duplex lead combines two fibres in one jacket, which keeps the installation simple: one lead gives a transmit path and a receive path, and both connectors plug into matching ports at either end.
The DPX designation identifies a duplex patch lead with two fibres in a single assembly. The lead is supplied as a finished 2 metre length, so it can be installed without field termination or splicing.
Multimode fibre uses a larger core than singlemode fibre, which suits shorter distances inside buildings, campuses and data centres. OM4 is the multimode grade designed for higher data rates over short runs than older multimode grades. The 50/125 µm core size is the standard size for this class of fibre, so the lead matches the rest of a multimode installation of this type.
A 2 metre lead is a practical length for connections within the same rack or to a neighbouring one. Choosing a length close to the actual route keeps excess cable out of the way and makes the rack easier to maintain. If the route is longer or passes through trunking, a longer lead or a different cable type may suit better.
Handle fibre leads with care. Avoid sharp bends, keep the connector end caps on when a lead is not in use, and clean the connector faces before plugging in. Secure the lead in the cable management of the rack so it does not pull on the ports. Label both ends so the path is easy to trace later.
Before ordering, check that the connector type and fibre grade match your switch, transceiver and patch panel ports. Molex supplies a broad structured-cabling range, so this lead is well suited to a Molex installation, but it can also be used wherever a multimode SC duplex connection is needed.
The Molex SC/SC DPX OM4 2 metre patch lead is a simple, practical choice for short multimode fibre connections. It provides a finished duplex link in a single assembly, ready to plug in and use.