





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000

The Molex SC/SC DPX OS1/2 9/125µm patch lead is a 1 metre singlemode fibre jumper designed for short fibre connections in structured cabling networks. It is part of the Molex range of copper and fibre connectivity products, and it provides a compact, factory-terminated link between two SC connector points.
Singlemode fibre uses a very small core, 9 µm in this case, with a 125 µm cladding. The narrow core allows light to travel in a single path, which keeps signal dispersion low and supports long distances and high bandwidth. The OS1/2 designation identifies the fibre as belonging to the singlemode class used in modern campus, data centre and backbone networks.
SC is a square push-pull connector with a locking latch. It snaps into a matching adapter with a click, which keeps the connection stable and easy to make without special tools. Because the connectors are pre-terminated, the lead can be installed directly into a patch panel or equipment port without field polishing.
This patch lead is suited to short singlemode links inside a rack or cabinet. Common uses include connecting a fibre patch panel to a network switch, router or firewall, linking a media converter to a fibre backbone, and making jumpers between two patch panels in the same equipment room. It can also be used in server rooms, data centres and office buildings where singlemode fibre is installed for longer runs and higher capacity.
Keep fibre patch leads short, neatly routed and clearly labelled. Use cable managers or fibre trays to avoid sharp bends, which can increase signal loss. Clean connectors with approved fibre cleaning tools before connecting, since dust on the end face is a common cause of poor performance. Do not pull on the cable or bend it tighter than the manufacturer’s recommended minimum radius.
Singlemode and multimode fibre are not interchangeable. Confirm that the lead matches the fibre type used by the active equipment and the rest of the link. Check the connector configuration on the installed transceivers and patch panels as well. If you are unsure which type is required, consult the equipment documentation or a qualified installer before ordering.
Pre-terminated patch leads save time on site, reduce the risk of installation errors and deliver consistent quality. For short links in a rack, a factory-made lead of a known length is usually more practical than building a custom jumper on site. Keeping a stock of common lengths also helps speed up repairs and changes.