





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Duplex singlemode 9/125 fiber patch cable, ST to ST connectors, 2 metres (6 ft.).
The Tripp Lite N352-02M is a duplex singlemode fiber patch cable designed to connect two fiber optic devices over a short distance. It has ST connectors on both ends and a 2 metre (6 ft.) length. It belongs to Tripp Lite’s fiber network cables range, which is supplied by Eaton.
The 9/125 designation refers to a fiber core of 9 micrometres with a cladding of 125 micrometres. Singlemode fiber carries a single light path through a very small core. This allows signals to travel longer distances with less loss than multimode fiber, which is why it is often chosen for backbone links, campus connections and higher-speed networks.
ST connectors have a round ferrule and a bayonet-style coupling that twists to lock in place. They are common on older network equipment, fiber patch panels and some media converters. Make sure both ends match the ports on your devices.
A duplex cable combines two fibers in one jacket. One fiber carries signals in one direction and the other carries them in the opposite direction. This gives a full-duplex link between two devices with a single cable assembly, which keeps cable management simple.
Because the cable is singlemode, it should be used only with singlemode transceivers and ports. Multimode equipment uses a different fiber core and will not perform correctly with this patch cable. Check the connector type on both devices, confirm the fiber mode, and measure the distance between them so the 2 metre length fits without strain or excess slack.
Fiber patch cables should be handled with care. Avoid sharp bends, do not pull on the cable body, and keep the connector end faces clean. Dust or oil on a fiber end face can reduce signal quality. Use a fiber cleaning tool or lint-free wipe before connecting. Store spare cables in a way that keeps the bend radius generous.
Tripp Lite is a well-known connectivity brand, and this patch cable is a straightforward option for anyone building or extending a singlemode fiber network. For full electrical or optical specifications, such as attenuation and maximum distance, consult the manufacturer’s datasheet before deployment.
Duplex singlemode 9/125 fiber patch cable, ST to ST connectors, 2 metres (6 ft.).
Share this on your favourite channel:



