





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Tripp Lite
Duplex singlemode 9/125 fiber patch cable, SC to ST connectors
Length: 3M (10 ft.)
The Tripp Lite N354-03M is a duplex singlemode fiber patch cable designed for connecting network devices over fiber optic links. With SC connectors on one end and ST connectors on the other, it bridges equipment that uses different connector styles, and its 3M (10 ft.) length suits short runs between devices in the same room or rack.
Singlemode fiber has a very small core, which allows light to travel along one path. This reduces signal dispersion and makes singlemode suitable for longer distances and higher bandwidth than multimode fiber. Because the core is so small, the connectors and the cable ends must be kept clean and aligned to maintain signal quality.
A duplex cable contains two fiber strands in a single jacket, one for sending and one for receiving. This allows full two-way communication between two devices using one patch cable, which keeps cabling simpler than running two separate single fibers.
SC and ST are two common fiber connector types. SC uses a push-pull square connector, while ST uses a bayonet-style round connector. A cable with SC on one end and ST on the other is useful when a switch, media converter or transceiver uses one connector style and a patch panel or other device uses the second. Always confirm the connector types on your equipment before ordering.
Keep the connector end caps on until the cable is installed. Avoid tight bends, which can damage the fiber, and route the cable away from sharp edges and heavy loads. Clean the connector end faces with an appropriate fiber cleaning tool before plugging them in, since dust or oil on the ferrule is a common cause of poor signal performance.
Check that the fiber type (singlemode 9/125), the duplex configuration and the SC to ST connector pairing match your equipment. If you need a different length, Tripp Lite lists this item in several lengths using the same naming pattern, so compare the part number before ordering.
Tripp Lite
Duplex singlemode 9/125 fiber patch cable, SC to ST connectors
Length: 3M (10 ft.)
Share this on your favourite channel: