





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Tripp Lite
400G Duplex Singlemode OS2 Fiber Cable, LC/UPC to LC/UPC, 5 m (16.8 ft), LSZH, Yellow
Lifetime limited warranty
The Tripp Lite N370X-05M is a duplex singlemode fiber optic patch cable designed for high-speed network links. With a 5 m (16.8 ft) length, a 400G switchable rating, OS2 singlemode fiber and LC/UPC male connectors on both ends, it is a practical choice for connecting active network equipment in data centres, server rooms, telecom closets and enterprise cabinets.
Fiber optic cables carry data as pulses of light instead of electrical signals. This makes them immune to electromagnetic interference and capable of much higher bandwidth over longer distances than copper. Singlemode fiber, which uses a very small core, is the standard choice for longer runs and for the highest data rates, and this cable is built on 9/125 OS2 singlemode fiber for that purpose.
LC connectors are small, push-pull connectors that fit the high port densities of modern switches and transceivers. The UPC polish is designed for singlemode links, giving a smooth, low-reflection contact between two connectors. Using matching UPC connectors throughout a link helps keep signal quality consistent, and this cable is supplied with UPC ends at both sides.
OS2 is the standard fiber specification for singlemode cabling used indoors and between buildings. It supports long distances with low signal loss, so it suits backbone and campus links as well as short patch runs inside a rack. Because the same fiber can be used for future upgrades, it is a sound choice for networks that are expected to grow.
The LSZH jacket is designed to produce little smoke and no halogen gas when it burns. This is useful in enclosed spaces, plenum areas and buildings where people and equipment need protection in a fire. Many building and safety rules call for low-smoke cable indoors, so LSZH is a common requirement for data cabling.
This cable is commonly used to connect a switch or router to a patch panel, to link two switches in adjacent racks, to connect a server or storage device to a fiber network, or to join equipment within a structured cabling system. The yellow jacket makes it easy to spot in a crowded cabinet, and the 5 m length covers most connections within a single room or between neighbouring racks.
Fiber connectors should be kept clean and protected when not in use. Dust caps should stay on unused ports, and the connector end faces should not be touched. Fiber cables should be routed with care, avoiding sharp bends, crushing and pulling on the connectors, as this can damage the fibers. Use a fiber-rated cleaning kit when a connection needs attention, and follow the equipment manufacturer’s guidance for transceiver and port compatibility.
Before ordering, confirm that the connector type, fiber type and speed rating match the transceivers and switches at both ends of the link. If your installation needs a different length, multimode fiber or a different jacket type, compare the other Tripp Lite fiber options before purchase. For projects with many links, plan the cable lengths in advance so that the right number of spares is on hand.
Tripp Lite
400G Duplex Singlemode OS2 Fiber Cable, LC/UPC to LC/UPC, 5 m (16.8 ft), LSZH, Yellow
Lifetime limited warranty
Share this on your favourite channel:



