





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
The Tripp Lite N820-02M is a 2 metre duplex multimode fiber optic patch cable with LC connectors on both ends. Designed for 10 Gigabit network links, it is a practical choice for connecting active equipment over short distances inside a building, rack or equipment room.
Fiber optic patch cables carry light rather than electrical signals, which means they are not affected by electromagnetic interference and keep signal integrity over the length of the run. Using a duplex LC pair keeps the cabling neat, because both transmit and receive fibers sit in one slim jacket with a small connector footprint.
OM3 is a laser-optimised multimode fiber with a 50 micron core. It is commonly used for 10 Gigabit Ethernet over short to medium runs, and it is a cost-effective option within buildings compared with singlemode fiber for distances of this kind. The 2 m length is suited to short jumper connections, such as linking a switch port to a patch panel in the same rack.
The LSZH jacket is made from a low-smoke, zero-halogen compound. It is intended to limit the density of smoke and the release of halogen gases if the cable is exposed to fire. Many building and data centre specifications ask for this type of jacket in enclosed spaces, so it is a common requirement for indoor cabling.
Keep the connector end-faces clean and protected when the cable is not in use, and avoid bending the fiber tighter than the manufacturer’s minimum bend radius. Route the cable with enough slack to avoid strain on the connectors. Always check that the connector type and fiber grade match your equipment before installing.
This is a 2 m patch cable. If you need a different length, check the product range for the matching model number.



