





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
The Tripp Lite N820-03M-OM4 is a 3 metre (10 foot) duplex multimode fiber patch cable designed for short, high-speed links. It has LC connectors on both ends and is intended for 10Gb and 100Gb network equipment that uses multimode fiber.
Fiber patch cables like this one are the connections between active equipment and structured cabling. They are used wherever a switch, router, server network card or media converter needs to meet a patch panel or another device with a short fiber run.
OM4 is a multimode fiber grade with a higher bandwidth than earlier OM1, OM2 and OM3 grades. It suits short-reach links inside buildings, especially in data centres, server rooms and campus backbones where 10Gb and 100Gb speeds are needed. Because it uses a 50 micron core, it works with the multimode optics used by most modern switches and transceivers.
The low-smoke zero-halogen sheath is a practical choice for indoor installations. It produces less smoke and no halogen gases when exposed to fire, which is valued in offices, hospitals, schools and other buildings where people gather or where ceiling voids and risers are shared.
Keep fiber patch cables free of sharp bends and avoid pulling on the connectors. Clean the LC ferrules before connecting, and keep dust caps on unused ports. Route the cable through cable managers so that it is not stressed when racks are moved or equipment is serviced. Match the cable to the transceiver type used by your equipment, as multimode and single-mode optics are not interchangeable.
Choose this cable when you need a 3 metre duplex OM4 LC/LC multimode jumper with an aqua jacket. If your installation needs a different length, colour or fiber grade, check the available options before ordering. Keep the supplier’s warranty information with your records.



