





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
The Tripp Lite N820X-10M-OM4 is a 10 metre duplex fiber optic cable designed for high-speed 400G multimode connections. It is built from 50/125 micron OM4 multimode fiber and terminated with LC-PC connectors at both ends. It is intended for short links where fast, reliable data transfer is needed between network equipment, such as switches, servers and storage devices.
Fiber optic cabling carries data as pulses of light rather than electrical signals. That makes it suitable for high bandwidth and for runs where electrical interference could be a problem. Multimode fiber such as OM4 is used for shorter distances inside buildings and data centres, and the 50/125 core size is the standard for this type of link.
OM4 is a grade of multimode fiber designed for higher speeds over short distances than older multimode grades. A duplex cable carries two fibers in one jacket, one for sending and one for receiving, so a single cable gives a full two-way connection. LC connectors are small, push-pull connectors that take up less space than older types, which helps when many links share a rack or patch panel. The PC polish is the standard finish for these connectors and is used in most multimode links.
The aqua jacket helps identify the cable as multimode fiber at a glance, which makes tracing and maintaining the network easier. The LSZH sheath is a halogen-free material that produces low smoke when it burns. This is often preferred in enclosed spaces such as data centres, offices and public buildings, where smoke and toxic gases are a concern.
This cable suits a range of short-run network jobs:
Before ordering, confirm that the cable’s connector type matches the ports on your switches, network cards or transceivers. Duplex LC-PC to LC-PC cables are common, but check your equipment’s specification. Make sure the fiber type also suits your network. OM4 multimode is intended for shorter links, and longer distances may need singlemode fiber. Measure the route carefully and allow a little slack so the cable is not stretched at either end.
Handle fiber cables with care. Avoid sharp bends, do not pull on the jacket, and keep the connector ends clean and covered when they are not in use. Dust on a connector can reduce signal quality, so a fiber cleaning tool is useful for any installation.
The Tripp Lite N820X-10M-OM4 is a practical 10 m OM4 duplex fiber patch cable for 400G multimode links. Its LC-PC connectors, LSZH jacket and aqua colour suit short runs in data centres, server rooms and network cabinets. It is backed by a lifetime limited warranty from Tripp Lite.



