





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
L2 unmanaged hardened PoE switch, 4 Gigabit PoE ports, 2 Gigabit SFP uplinks
802.3af/at/bt, port 1 Hi-PoE 60W, power budget up to 110W, DIN rail mount

The Hikvision DS-3T0506HP is a hardened unmanaged PoE switch for surveillance and networking projects where standard office equipment would not survive. Its Layer 2 design needs no configuration: connect the devices, supply power and the switch starts forwarding traffic. It is well suited to installers who want a dependable, ready-to-use switch for IP cameras and access points.
The unit combines four Gigabit PoE ports with two Gigabit SFP uplink ports. The copper ports power and connect devices, while the SFP ports accept fibre modules to link the switch back to a core network or to another building over longer distances.
The 110W power budget is shared among the connected PoE devices. Before installing, check that the chosen power supply can deliver this budget, and that the devices drawing power on each port stay within the limit for that port. Port 1 is the port to use for a device that needs the higher 60W Hi-PoE output. Ports 3 and 4 allow longer cable runs, which helps when a camera or access point sits far from the cabinet.
The wide temperature range of -40°C to 75°C makes the switch suitable for unheated outbuildings, roadside cabinets and factory floors where temperatures change sharply. The DIN rail mount lets the switch sit neatly in a control panel or enclosure alongside other equipment, keeping cabling organised and the installation tidy.
The 6kV surge protection helps guard the switch against electrical spikes that can travel along long cable runs, which is common in outdoor and industrial sites. The PoE watchdog monitors connected devices and can restart a unit that has stopped responding, reducing the need for a site visit. Port isolation keeps devices on separate ports from communicating directly with each other, which adds a layer of separation between cameras and other connected equipment.
Typical applications include powering IP cameras across a car park, perimeter or yard, linking outdoor wireless access points, and serving industrial sites where the network must run reliably in heat, cold or dusty conditions. The switch can also sit in a remote cabinet and connect to the main network through one of its SFP fibre ports.
Because the power supply is sold separately, confirm the required supply with the installation plan before ordering. Choose SFP modules that match the fibre type and distance needed for the uplink.
L2 unmanaged hardened PoE switch, 4 Gigabit PoE ports, 2 Gigabit SFP uplinks
802.3af/at/bt, port 1 Hi-PoE 60W, power budget up to 110W, DIN rail mount
Share this on your favourite channel: