Lenovo South Africa Channel Awards 2
Lenovo South Africa Channel Awards
Congratulations to our Server Team. Distributor of The Year!
ThinkSystem Tower Servers
Modernize to boost your business with Windows Server 2022.
Think Big. Think Lenovo. ThinkSystem Tower Servers.
Lenovo F1

INFRASTRUCTURE TEAM

+27 (0) 11 237 1000

INFRASTRUCTURE TEAM

Hikvision
HK-SFP+-10G-20-1310-DF

Hikvision
10G SFP+ single mode transceiver, LC duplex, 1310nm, 20km reach, 0 to 70°C operating range

SKU HK-SFP+-10G-20-1310-DF Category Brand:
Share

Hikvision HK-SFP+-10G-20-1310-DF 10G SFP+ Single Mode Fiber Transceiver for 20km Links

The Hikvision HK-SFP+-10G-20-1310-DF is a 10 gigabit SFP+ optical transceiver built for single mode fiber networks. It provides a fiber interface for a compatible SFP+ port, letting you carry 10G traffic over distances of up to 20km. Each module has a transmitter and receiver operating at 1310nm, connected through a duplex LC fiber connector. It is a practical choice when a network needs a long, reliable fiber backbone between switches, buildings or sites.

Fiber transceivers like this one are the link between copper-based network equipment and the optical cabling that runs through ducts, trenches and risers. Instead of being fixed to one device, the module plugs into a host port, so the same switch can be reconfigured or upgraded with different optics as the network changes. Single mode fiber carries light over far greater distances than multimode, which is why it is used for campus backbones and long internal runs.

Key Features and Specifications

  • Form factor: SFP+ (small form-factor pluggable)
  • Data rate: 10G
  • Fiber type: Single mode
  • Connector: LC duplex
  • Wavelength: TX 1310nm and RX 1310nm
  • Reach: 20km
  • Operating temperature: 0 to 70°C
  • Product type: Pluggable optical transceiver module

Why Single Mode at 1310nm Matters

Single mode fiber has a very small core, so light travels along a single path with little dispersion. This is what allows the 20km reach rated for this module. The 1310nm wavelength is one of the standard windows used for single mode links, and it balances signal strength and cable loss well for medium-distance runs. When you install a pair of modules, both ends must match in wavelength and reach, so a 1310nm 20km module should be paired with another compatible 1310nm module at the far end.

Operating Environment

The rated operating temperature range of 0 to 70°C covers the conditions found in most indoor locations, including equipment rooms, server cabinets, comms cupboards and control rooms. Keep modules out of direct sunlight and ensure the host switch has adequate airflow, as optics generate heat in dense installations. For outdoor cabinets or unusually hot or cold areas, check the environmental rating against the actual site conditions before installing.

Typical Applications

This transceiver suits a range of network designs. In a campus or business environment it can link a core switch to a building distribution switch located a long way off. In security installations it can carry IP camera and recording traffic over fiber from remote blocks or outbuildings back to a central network room. It is also useful for connecting access control and intercom systems across large sites, and for building redundant uplinks between core switches.

Installation Tips

Clean the LC connectors before inserting them, since dust on the fiber end face is a common cause of link problems. Insert the module until it clicks into the SFP+ port and use the correct dust caps when a module is not in use. Confirm that the host device supports SFP+ 10G optics and that the port is set to the matching speed. Once both ends are connected, check the link status lights on the switch and verify the connection is stable under load.

Ordering Notes

Before ordering, confirm that the host equipment uses SFP+ ports and that the far end of the link is fitted with a compatible single mode 1310nm module. Also check that the fiber run is single mode and suitable for the 20km reach. If the cabling is multimode, this module will not be the right choice and a different transceiver type should be selected.

SKU HK-SFP+-10G-20-1310-DF Category Brand:

Hikvision
HK-SFP+-10G-20-1310-DF

Hikvision
10G SFP+ single mode transceiver, LC duplex, 1310nm, 20km reach, 0 to 70°C operating range

Share this on your favourite channel:

Sign Up & Register

Mustek’s Infrastructure Technology Team are one of the largest suppliers of infrastructure technology in the country and on the continent. Register to become a reseller. Already a reseller?

Sign up for the latest pricelists, specials and offers.

Are you registered as a reseller?*
Area of interest?*

UPS Q&A

Keep up to date with the latest product developments from our divisions and outstanding solutions that will inspire you.

UPS Configuration Questionnaire

Ready to talk