





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Molex
6 Core Multimode OM3 Fibre, Loose Tube, PE Insulated, Black
Suitable for indoor and outdoor (Int/Ext) use
The Molex CFR-00794 is a 6 core multimode fibre optic cable supplied by Molex as part of its copper and fibre structured cabling range. It belongs to the OM3 multimode family, a fibre grade commonly specified for data links inside buildings, between communications rooms and across campus backbones. Where copper cabling reaches its limits in distance or electrical interference, a fibre cable such as this one carries signals as light through glass fibres.
The cable is described as suitable for both internal and external (Int/Ext) installation. That makes it useful where a single cable route passes from the inside of a building to the outside, for example between two buildings on the same site. The black PE insulated jacket provides the outer protection for the cable core. Polyethylene is a widely used jacket material for cables that must withstand handling, moisture and general site conditions.
In a loose tube design, the fibres are housed in tubes that sit inside the cable sheath rather than being bonded directly to the outer jacket. This arrangement allows the fibres to move slightly within the tube, which helps the cable handle changes in temperature and mechanical stress during installation and use. Loose tube cable is therefore a common choice for routes that may be exposed to varying conditions.
Multimode fibre carries light over a relatively wide core, which suits shorter to medium distance links where the equipment on each end is designed for multimode transmission. OM3 is a specific multimode grade that supports higher data rates than older multimode grades, which is why it is often used in modern network backbones.
Fibre cable should be installed by someone who understands fibre handling. Observe the minimum bend radius, avoid pulling the cable beyond its rated tensile load, and keep the ends clean and protected until termination. Termination and testing should be carried out with suitable tools and connectors that match the fibre type and the connectivity panels in use. Where the cable runs outdoors or underground, appropriate ducting, sealing of entry points and protection from sunlight and water help extend the life of the installation.
The Molex CFR-00794 suits a range of structured cabling applications:
If your project calls for multimode fibre with an indoor and outdoor rating, a loose tube construction and a black PE jacket, this Molex cable fits that description. Confirm the fibre count, the number of links needed, the route length and the termination method before ordering, and check the Molex datasheet for the full technical details that apply to your installation.
Whether you are building a new network or upgrading an existing backbone, selecting the right fibre cable at the planning stage avoids costly rework later. The Molex CFR-00794 is a practical option for structured cabling professionals who need a dependable multimode OM3 cable for mixed indoor and outdoor routes.
Molex
6 Core Multimode OM3 Fibre, Loose Tube, PE Insulated, Black
Suitable for indoor and outdoor (Int/Ext) use
Share this on your favourite channel:



