





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
Tripp Lite
Duplex Singlemode 9/125 Fiber Patch Cable (SC/ST), 5M (16 ft.)
The Tripp Lite N354-05M is a 5 metre (16 foot) duplex singlemode fiber patch cable for connecting network equipment over fiber. Its SC connector on one end and ST connector on the other make it a practical link between devices that use different fiber connector styles, such as switches, media converters, patch panels and fiber-enabled network cards.
A duplex patch cable contains two optical fibres side by side in one outer jacket. One fibre carries signals in one direction and the other carries signals in the opposite direction, so the cable gives a complete two-way connection with a single lead. This is the arrangement used by most fiber links between network devices, and it keeps cable management tidy compared with running two separate single fibres.
The 9/125 designation refers to the size of the fibre core and its cladding in microns. Singlemode fibre has a very small core, which allows light to travel in a single path. This reduces signal dispersion and allows the signal to travel further than multimode fibre, which is why singlemode is chosen for longer runs, backbone links and installations where future upgrades to higher speeds may be needed.
SC connectors have a square push-pull housing and are widely used in structured cabling and on many switches and transceivers. ST connectors have a round housing with a bayonet-style twist lock and are common on older network equipment and some patch panels. Having SC at one end and ST at the other means the N354-05M can join these two common connector families directly.
Five metres is a common patch length for connections between adjacent racks, from a wall-mounted fiber box to a nearby switch, or between devices sitting one above the other in a cabinet. A length that fits the route without large amounts of slack keeps the installation neat, reduces clutter and lowers the risk of the fibre being bent too tightly.
Fiber patch cables should be handled with care. Avoid sharp bends, do not pull on the jacket, and keep dust caps on the connectors until the cable is installed. Clean connector end faces before connecting them, as even small amounts of dust can reduce signal quality. Route the cable through cable managers or trays so that it is supported and not left hanging under its own weight.
Before ordering, confirm that the connector types on your equipment match the SC and ST ends of this cable, and that your installation is designed for singlemode fibre. If your network uses a different fibre type, such as multimode, this cable will not be suitable.
The Tripp Lite N354-05M offers a clear, practical solution for linking singlemode fiber equipment over a short, defined distance. It suits IT professionals, installers and system administrators who need a dependable duplex patch lead to join SC and ST devices in data centres, network rooms and structured cabling installations.
Tripp Lite
Duplex Singlemode 9/125 Fiber Patch Cable (SC/ST), 5M (16 ft.)
Share this on your favourite channel: