





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
The Tripp Lite N390-03M-8LC-AP is a singlemode fibre optic breakout patch cable designed for high-speed network links. It joins one multi-fibre MTP/MPO connector to four separate LC connectors. This allows a single high-density port on a switch, server or transceiver to be split into four independent fibre connections, which is a common need in modern data centres and campus backbones.
Eaton’s Tripp Lite range includes fibre active optical and connectivity products for business and data centre use. This cable belongs to the fibre network cable group and is supplied as a ready-made assembly, so it does not need field termination.
MTP/MPO is a multi-fibre push-on connector that carries several fibres in one housing. It is widely used for high-density links because one plug replaces many single connectors. The APC finish is angled, which reduces back reflection, and it is used with APC-compatible equipment. LC is a small form-factor connector commonly used on transceivers and patch panels, and the UPC finish is flat-polished, so the APC and UPC ends should be matched to the right equipment.
The cable is described for 40 and 100 GbE applications and for the QSFP+ 40GBASE-PLR4 standard. GbE is Gigabit Ethernet, and the 40GBASE-PLR4 designation refers to a 40 Gb/s Ethernet interface over singlemode fibre. Before connecting, confirm that your switch, network interface card or transceiver supports this standard and the connector finishes listed above.
The plenum rating means the jacket is suitable for air-handling spaces, such as the void above a suspended ceiling. Building codes often require plenum-rated cable in those areas, so check local requirements before installing. The yellow jacket helps with identification, and many installers use colour coding to separate singlemode runs from multimode runs.
Route the cable without sharp bends and avoid pulling it by the connector housings. Keep dust caps on unused connectors, and clean the ends before mating. The fibre ends are sensitive to contamination, and a clean connection is essential for reliable performance.
The cable is most useful where a high-capacity port must serve several lower-speed links. By splitting one MTP/MPO trunk into four LC pairs, it simplifies cabling and makes efficient use of switch ports. Planning the length and path in advance will help avoid slack problems and ensure the 3 m (10 ft.) length suits your rack layout.
Before ordering, check stock and lead time with the shop, because items from this supplier range are ordered in on request. If you are unsure whether this breakout cable matches your equipment, ask for a compatibility check first.



