





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
The Tripp Lite N845-05M-8L-MG is a 5 metre multimode fiber optic fan-out cable that links a single 40G MTP/MPO connector to four LC duplex connectors. It is designed for 40GBASE-SR4 applications, where four parallel fiber pairs carry traffic between high-density switch or server ports and standard LC patching.
A 40G SR4 port uses an MTP/MPO connector that carries eight fibers in a single plug. Most patch panels, transceivers and test equipment use LC duplex connectors instead. A fan-out cable splits the MTP/MPO trunk into four LC duplex pairs, so each pair can be patched, tested and labelled separately. This makes moves, adds and changes simpler in a mixed cabling environment.
OM4 is a laser-optimised multimode fiber designed for short to medium distances inside buildings and data centres. Its magenta colour is widely used across the industry to identify multimode cable, so this cable will be easy to recognise among singlemode runs in the same rack.
A plenum-rated cable is made with a jacket that is intended for installation in plenum spaces, which are the air-handling zones above suspended ceilings or below raised floors. Where local building or fire codes call for plenum-rated cabling, this rating is a key selection point. Check the local requirements before installation.
The push/pull tabs on the connectors give a firm grip when plugging in or removing the cable. They are useful in tight, high-density panels where fingers have limited access.
Handle MTP/MPO connectors with care and keep the end faces clean and protected until they are connected. Keep the bend radius within the manufacturer’s stated limits and secure the cable so that it is not stressed at the connectors. Confirm that the MTP/MPO polarity matches the equipment at both ends before connecting.



