





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
The Tripp Lite N818-03M is a 3 metre (10 ft.) duplex multimode fiber patch cable designed for structured cabling and equipment connections where a 10Gb data rate is required. It is built from 50/125 micron OM3 multimode fiber and terminated with an LC connector at one end and an ST connector at the other.
Fiber patch cables are the short jumper leads used to connect ports on switches, servers, routers and media converters to a patch panel or to each other. This model is aimed at short runs inside a rack, between cabinets in the same room, or between a panel and nearby equipment.
The cable is part of the Tripp Lite fiber connectivity range, which is supplied by Eaton. It is listed in the multimode fiber patch cable category of the shop.
OM3 is a laser-optimised multimode fiber grade that supports 10Gb links over the distances typical of building and data centre cabling. The LSZH jacket is a material choice intended to reduce smoke and halogen gases in a fire, which is why it is often specified for enclosed spaces, plenum-style areas and public buildings. The aqua colour is a common convention for multimode fiber, making it easy to distinguish from singlemode leads in the same rack.
The N818-03M can be used in a number of common network setups:
Before ordering, confirm that the LC and ST connector types match the ports and panels in your installation, and that the equipment supports 10Gb multimode operation. Mixed-connector patch leads such as LC to ST are used where the two ends of a link have different connector standards. If you are unsure of the connector types or the fiber grade already installed, check the equipment specifications or ask for help choosing the right lead.
Fiber patch leads are sensitive to bending and contamination. Keep the bend radius generous, store the lead with the dust caps fitted, and clean the connector end faces before connecting. Route the cable away from sharp edges and heavy loads in the cabinet to protect the fiber.