





INFRASTRUCTURE TEAM
+27 (0) 11 237 1000
The Tripp Lite N820-20M is a 20-metre fibre optic patch cable designed for structured network connections in offices, server rooms and data centres. It is a duplex multimode cable with LC connectors on both ends and a 50/125 micron OM3 fibre core, suited to 10Gb network links.
Multimode fibre carries light over a relatively short distance inside buildings and campuses, and it is the usual choice for links between switches, servers and patch panels in the same site. The OM3 grade is a laser-optimised multimode fibre, which is widely used for 10Gb Ethernet over short to medium runs.
The fibre core is 50 microns, with a 125 micron cladding. OM3 multimode fibre is typically used with short-wavelength laser transceivers. The LC connector is a small form factor design with a latching push-pull action. It is the standard connector on many modern switches, transceivers and fibre patch panels, which is why it is a common choice for new installations.
The LSZH sheath is designed to produce low smoke and no halogen gases when burned. This makes LSZH cable a common specification for enclosed indoor spaces, such as ceilings, risers, and equipment rooms, where people are present and ventilation may be limited. Check the local building and cabling rules for the required cable rating before installation.
Before buying, confirm that both ends of the link use LC ports and multimode transceivers. Check that the transceivers support the required speed and that the fibre type matches the network design. A 20-metre cable is a fixed length, so it suits runs where the distance between devices is comfortably within that length. For longer or shorter runs, a different length or a field termination option should be considered.
Fibre patch cables should be handled with care. Avoid sharp bends, do not pull on the cable by the jacket, and keep the connector end caps on until the cable is installed. Clean the connector ends before connection, as dust on the ferrule is a common cause of link problems. Route the cable away from heat sources and sharp edges, and use cable management in racks to keep the links tidy and to protect the bend radius.
The Tripp Lite N820-20M gives a simple, ready-made 20-metre OM3 multimode link for 10Gb networks. Its LC connectors, aqua LSZH jacket and duplex design make it a practical choice for indoor fibre connections between switches, servers and patch panels.



